Audi Q3 tyre pressures
Front 33 psi (2.3 bar), rear 33 psi (2.3 bar) on the standard 17-inch wheels, and the figures for the other wheel size it was sold with. Manufacturer data, checked cold.
| Wheels | Tyre size | Front | Rear |
|---|---|---|---|
| 17"standard | 235/55R17 | 33 psi · 2.3 bar | 33 psi · 2.3 bar |
| 18" | 235/50R18 | 33 psi · 2.3 bar | 33 psi · 2.3 bar |
Manufacturer figures for the Audi Q3, normal load, tyres cold. If the label on your door pillar or fuel flap says something different, go with that.
Resetting the tyre pressure warning light on your Audi
Most UK Audis (A1, A3, A4, Q2, Q3 and others) use the indirect tyre pressure loss indicator. Some larger models have sensors in the wheels and show 'Tyre pressure monitoring' instead. Either way, Audi asks you to store the pressures after changing them.
- Set all four tyres to the correct cold pressure for the load.
- Switch the ignition on and stay parked.
- In the MMI, go to Car (or MENU) > Systems > Servicing & checks > Tyre pressure monitoring (or Tyre press. loss indicator).
- Choose Store tyre pressures and confirm.
Cars without the MMI screen
- Some A1s have a button in the glovebox: hold it until you hear a tone.
- Older cars without MMI store the pressures through the instrument panel menu, using the reset button on the wiper stalk.
When to reset: Store the pressures every time you change them, or change wheels or tyres.
Menu names vary by model and year, so check your handbook if yours looks different. More in what the warning light means.
Got a different Q3? Check by registration
Put your reg in and we'll show the figures for your exact car, including the wheel size it left the factory on.
What tyre pressure should a Q3 have?
33 psi at the front and 33 psi at the rear (2.3 and 2.3 bar) on the standard 17-inch wheels, with the tyres cold. Larger optional wheels use slightly different figures — see the table above.
Should I use a higher pressure when the car is loaded?
The manufacturer gives one figure for this car, so no. If you're carrying a full load for a long motorway run, the label on the door pillar may show a higher figure — follow that if it does.
What tyre size does the Q3 use?
235/55R17 or 235/50R18, depending on the wheels it was ordered with. The size is on the tyre's sidewall, e.g. 235/40R18.
Check them cold. Pressures are set for tyres that haven't been driven more than a mile or two. After a run they read 3–4 psi high.
Once a month, and before a long trip. Tyres lose about 1 psi a month on their own.
The sticker wins. If your car's door-pillar or fuel-flap label says something different, go with that — it knows your exact spec.