Right PressureTyre pressures by registration
Right Pressure › All cars › BMW › 4 Series Gran Coupe xDrive

BMW 4 Series Gran Coupe xDrive tyre pressures

Front 35 psi (2.4 bar), rear null psi (null bar) on the standard 18-inch wheels, and the figures for the other wheel size it was sold with. Manufacturer data, checked cold.

Front
35psi
2.4 bar
225/45R18
Rear
psi
bar
255/40R18
WheelsTyre sizeFrontRear
18"standard225/45R18 / 255/40R1835 psi · 2.4 bar psi · bar
19"225/40R19 / 255/35R1935 psi · 2.4 bar36 psi · 2.5 bar
Load/speed rating 91YWheel bolt torque 140 NmPCD 5x120Bolt thread M14x1.25

Manufacturer figures for the BMW 4 Series Gran Coupe xDrive (F36), normal load, tyres cold. If the label on your door pillar or fuel flap says something different, go with that.

Resetting the tyre pressure warning light on your BMW

BMW has two systems: the indirect Flat Tyre Monitor, common on older cars and those with run-flat tyres, and the Tyre Pressure Monitor, with sensors in the wheels, on most recent cars. Both need a reset after the pressures change.

  1. Set all four tyres to the correct cold pressure.
  2. In iDrive, go to My Vehicle (or Vehicle info) > Vehicle status > Tyre Pressure Monitor (or Flat Tyre Monitor).
  3. Start the engine but don't drive off, then select Perform reset.
  4. Drive off. Above about 19 mph the new pressures are accepted; on the sensor system the tyres turn green on the screen when it's done.

Older cars without iDrive

  1. Use the button on the end of the indicator stalk to scroll to the tyre reset item and hold it, or press the separate RESET button, then drive.

When to reset: Reset after every pressure adjustment and every tyre or wheel change.

Exact menu names on the newest iDrive versions may differ. Check the handbook in the car's menu.

Menu names vary by model and year, so check your handbook if yours looks different. More in what the warning light means.

Got a different 4 Series Gran Coupe xDrive? Check by registration

Put your reg in and we'll show the figures for your exact car, including the wheel size it left the factory on.

What tyre pressure should a 4 Series Gran Coupe xDrive have?

35 psi at the front and null psi at the rear (2.4 and null bar) on the standard 18-inch wheels, with the tyres cold. Larger optional wheels use slightly different figures — see the table above.

Should I use a higher pressure when the car is loaded?

The manufacturer gives one figure for this car, so no. If you're carrying a full load for a long motorway run, the label on the door pillar may show a higher figure — follow that if it does.

What tyre size does the 4 Series Gran Coupe xDrive use?

225/45R18, 255/40R18, 225/40R19 or 255/35R19, depending on the wheels it was ordered with. The size is on the tyre's sidewall, e.g. 235/40R18.

Check them cold. Pressures are set for tyres that haven't been driven more than a mile or two. After a run they read 3–4 psi high.

Once a month, and before a long trip. Tyres lose about 1 psi a month on their own.

The sticker wins. If your car's door-pillar or fuel-flap label says something different, go with that — it knows your exact spec.

UK

Pressures sorted. MOT or service due?

Garage List has every independent MOT centre in Great Britain, straight from the DVSA register. Find one near you and call them direct, with no booking fees and nobody in the middle. Some take bookings online too.