BYD Seal U DMi tyre pressures
Front 36 psi (2.5 bar), rear 36 psi (2.5 bar) on the standard 19-inch wheels. Manufacturer data, checked cold.
Manufacturer figures for the BYD Seal U DMi (SUV), normal load, tyres cold. If the label on your door pillar or fuel flap says something different, go with that.
Got a different Seal U DMi? Check by registration
Put your reg in and we'll show the figures for your exact car, including the wheel size it left the factory on.
What tyre pressure should a Seal U DMi have?
36 psi at the front and 36 psi at the rear (2.5 and 2.5 bar) on the standard 19-inch wheels, with the tyres cold.
Should I use a higher pressure when the car is loaded?
The manufacturer gives one figure for this car, so no. If you're carrying a full load for a long motorway run, the label on the door pillar may show a higher figure — follow that if it does.
What tyre size does the Seal U DMi use?
235/50R19. The size is on the tyre's sidewall, e.g. 235/40R18.
Check them cold. Pressures are set for tyres that haven't been driven more than a mile or two. After a run they read 3–4 psi high.
Once a month, and before a long trip. Tyres lose about 1 psi a month on their own.
The sticker wins. If your car's door-pillar or fuel-flap label says something different, go with that — it knows your exact spec.