Jeep Renegade Hybrid-Phev tyre pressures
Front 32 psi (2.2 bar), rear 32 psi (2.2 bar) on the standard 18-inch wheels, and the figures for the other wheel size it was sold with. Manufacturer data, checked cold.
| Wheels | Tyre size | Front | Rear |
|---|---|---|---|
| 18"standard | 225/55R18 | 32 psi · 2.2 bar | 32 psi · 2.2 bar |
| 19" | 235/45R19 | 32 psi · 2.2 bar | 32 psi · 2.2 bar |
Manufacturer figures for the Jeep Renegade Hybrid-Phev (facelift), normal load, tyres cold. If the label on your door pillar or fuel flap says something different, go with that.
Got a different Renegade Hybrid-Phev? Check by registration
Put your reg in and we'll show the figures for your exact car, including the wheel size it left the factory on.
What tyre pressure should a Renegade Hybrid-Phev have?
32 psi at the front and 32 psi at the rear (2.2 and 2.2 bar) on the standard 18-inch wheels, with the tyres cold. Larger optional wheels use slightly different figures — see the table above.
Should I use a higher pressure when the car is loaded?
The manufacturer gives one figure for this car, so no. If you're carrying a full load for a long motorway run, the label on the door pillar may show a higher figure — follow that if it does.
What tyre size does the Renegade Hybrid-Phev use?
225/55R18 or 235/45R19, depending on the wheels it was ordered with. The size is on the tyre's sidewall, e.g. 235/40R18.
Check them cold. Pressures are set for tyres that haven't been driven more than a mile or two. After a run they read 3–4 psi high.
Once a month, and before a long trip. Tyres lose about 1 psi a month on their own.
The sticker wins. If your car's door-pillar or fuel-flap label says something different, go with that — it knows your exact spec.