Rover 75 tyre pressures
Front 30 psi (2.1 bar), rear 28 psi (1.9 bar) on the standard 16-inch wheels. Manufacturer data, checked cold.
Manufacturer figures for the Rover 75, normal load, tyres cold. If the label on your door pillar or fuel flap says something different, go with that.
Got a different 75? Check by registration
Put your reg in and we'll show the figures for your exact car, including the wheel size it left the factory on.
What tyre pressure should a 75 have?
30 psi at the front and 28 psi at the rear (2.1 and 1.9 bar) on the standard 16-inch wheels, with the tyres cold.
Should I use a higher pressure when the car is loaded?
The manufacturer gives one figure for this car, so no. If you're carrying a full load for a long motorway run, the label on the door pillar may show a higher figure — follow that if it does.
What tyre size does the 75 use?
215/55R16. The size is on the tyre's sidewall, e.g. 235/40R18.
Check them cold. Pressures are set for tyres that haven't been driven more than a mile or two. After a run they read 3–4 psi high.
Once a month, and before a long trip. Tyres lose about 1 psi a month on their own.
The sticker wins. If your car's door-pillar or fuel-flap label says something different, go with that — it knows your exact spec.