Toyota Corollla Hybrid tyre pressures
Front 32 psi (2.2 bar), rear 32 psi (2.2 bar) on the standard 15-inch wheels, and the figures for the other wheel size it was sold with. Manufacturer data, checked cold.
| Wheels | Tyre size | Front | Rear |
|---|---|---|---|
| 15"standard | 195/65R15 | 32 psi · 2.2 bar | 32 psi · 2.2 bar |
| 16" | 205/55R16 | 32 psi · 2.2 bar | 32 psi · 2.2 bar |
Manufacturer figures for the Toyota Corollla Hybrid, normal load, tyres cold. If the label on your door pillar or fuel flap says something different, go with that.
Tyres at the MOT
In 2025, the Toyota Corolla Hybrid failed its MOT on tyres in 4.3% of 78,692 tests. Cars of the same age failed on tyres 4.9% of the time, so it failed less often than average for its age. Another 19.3% passed with a tyre advisory, usually tread close to the limit.
What the MOT tester checks on your tyres · The full 2025 figures
DVSA anonymised MOT data, 2025: MOT tests on cars (class 4), not counting retests. The figures cover the whole Toyota Corolla Hybrid range, not only this version. Contains public sector information licensed under the Open Government Licence v3.0.
Resetting the tyre pressure warning light on your Toyota
Almost all UK Toyotas since 2014 have sensors in the wheels, but Toyota's system compares readings with the pressures stored when it was last set up, so it needs telling when the pressures are right.
- Set all four tyres to the cold pressure on the door-pillar label.
- Turn the ignition on.
- Newer models (Aygo X, Yaris, Corolla, C-HR, RAV4 and others): using the steering-wheel buttons, open Vehicle Settings on the dashboard display, choose the tyre pressure item and follow the instructions to set it.
- Older models: press and hold the small SET button under the dashboard until the warning light blinks slowly 3 times, then leave the ignition on for a few minutes.
When to reset: Set it up again after inflating under-inflated tyres, changing tyres, or changing the specified pressures. Readings may take a short drive to update.
Menu names vary by model and year, so check your handbook if yours looks different. More in what the warning light means.
Got a different Corollla Hybrid? Check by registration
Put your reg in and we'll show the figures for your exact car, including the wheel size it left the factory on.
What tyre pressure should a Corollla Hybrid have?
32 psi at the front and 32 psi at the rear (2.2 and 2.2 bar) on the standard 15-inch wheels, with the tyres cold. Larger optional wheels use slightly different figures — see the table above.
Should I use a higher pressure when the car is loaded?
The manufacturer gives one figure for this car, so no. If you're carrying a full load for a long motorway run, the label on the door pillar may show a higher figure — follow that if it does.
What tyre size does the Corollla Hybrid use?
195/65R15 or 205/55R16, depending on the wheels it was ordered with. The size is on the tyre's sidewall, e.g. 235/40R18.
Does the Toyota Corolla Hybrid fail the MOT on tyres more often?
No, less often than average for its age. In 2025, 4.3% of Toyota Corolla Hybrid MOT tests failed on tyres, against 4.9% for cars of the same age (DVSA MOT data, 78,692 tests). Another 19.3% passed with a tyre advisory.
Check them cold. Pressures are set for tyres that haven't been driven more than a mile or two. After a run they read 3–4 psi high.
Once a month, and before a long trip. Tyres lose about 1 psi a month on their own.
The sticker wins. If your car's door-pillar or fuel-flap label says something different, go with that — it knows your exact spec.