Right Pressure · tyre pressures by registration

Volvo tyre pressures by model

5 models so far — it grows every time someone checks a car. Not here yet? Check by registration and it's free.

Volvo

Resetting the tyre pressure warning light on your Volvo

Most Volvos use an indirect system that has to be calibrated after setting the pressures. Some 2012–2016 cars had sensors in the wheels instead.

  1. Switch off and set all four tyres to the door-pillar label pressures, cold.
  2. Start the car, staying parked.
  3. On the centre screen, open the Car Status app, go to the TPMS (or Status) tab and press Calibrate. On some years it's Settings > My Car > IntelliSafe > Calibrate Tyre Pressure.
  4. Confirm all four tyres have been checked, then drive. The tyre icons turn from grey to green when it's done, usually within 10 minutes above 20 mph.

Older models (about 2012–2016)

  1. With the ignition on (engine off on sensor cars), go to MY CAR > Calibrate tyre pressure and press OK, then drive.

When to reset: Calibrate every time you change a tyre pressure or a tyre, including switching to the heavy-load pressures.

Menu names vary by model and year, so check your handbook if yours looks different. More in what the warning light means.