Right Pressure · tyre pressures by registration

Peugeot tyre pressures by model

11 models so far — it grows every time someone checks a car. Not here yet? Check by registration and it's free.

Peugeot

Resetting the tyre pressure warning light on your Peugeot

Most UK Peugeots from about 2013 (208, 2008, 308, 3008, 5008 and current models) use an indirect under-inflation detection system that compares wheel speeds, so it has to be reset after setting the pressures. Some older Peugeots had sensors in the valves.

  1. Set all four tyres to the label pressures, cold, suited to the load.
  2. Switch the ignition on, staying parked.
  3. On the touchscreen, open the Driving (or Vehicle) menu and choose Under-inflation initialisation; on the newest i-Connect screens it's Settings > Vehicle > Safety > Tire Pressure Setup.
  4. Confirm with Yes. A message and a beep confirm it.

Cars without a touchscreen

  1. Press and hold the under-inflation reset button on the dashboard for about 3 seconds until it beeps.
  2. On the Peugeot 108, the button is in the glovebox: press it until the warning lamp flashes 3 times.

When to reset: Reset after every pressure adjustment or wheel change. The warning won't clear by itself.

Menu names vary by model and year, so check your handbook if yours looks different. More in what the warning light means.